The sE4400 is vintage versatility at its finest.
Four polar patterns, a vintage-style brass capsule, two bass cuts and two pads, and the most adaptable shockmount around – the 4400 is pure modern classic.
Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille that can take a beating during day-to-day tour life. The sE4400 appeals with its down-to-earth elegance, offering discrete electronics prioritising the features you really need.
Select between 4 polar patterns with metal switches, from cardioid to omnidirectional or figure-eight to hypercardioid, with a gold-sputtered, dual-diaphragm capsule for precision-based miking techniques to minimize signal bleed from unwanted sources in demanding studio or fast-paced live environments.
DENT-PROOF METAL HOUSING & PREMIUM FINISH
Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille, the sE4400 is built to last for years of demanding studio use and the day-to-day life of a touring artist.
Individually tuned and cared for by sE’s skilled technicians, each sE4400’s hand-crafted, gold-sputtered, dual-diaphragm capsule captures sound sources of all kinds with breathtaking clarity and precision, be it in demanding studio or fast-paced live environments.
CUSTOM SHOCKMOUNT + CHASSIS
The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around and used flat against a drum head or guitar cab, or angled outwards and pushed through inside of a kick drum. And at less than 3/4″ thick, it fits neatly in the palm of your hand, but is built to take a beating on the road.
SWITCHABLE PRE ATTENUATION PAD & BASS-CUT FILTER
Select between two pre-attenuation pads for an extended dynamic range and compensate for loud vocals, guitars, drums, and brass instruments. With two low-cut filters, easily tame excessive low-frequency rumble and proximity effect and efficiently adjust for close-miking techniques.
The mic has a unique, black, non-reflective, non-marking, rubberised finish which is ideal for live stage, theatre, TV and broadcast applications which require lighting.
Polar patterns: Cardioid, Hypercardioid, Omni-directional, Figure-8
Frequency range: 20 Hz – 20 kHz
Sensitivity: 25 mV / Pa (-32 dBV)
Max SPL: 137 / 147 / 157 dB (0/10/20 dB Attenuation pad – 0.5% THD)
Equivalent noise level: 13 dB(A)
Signal to noise ratio: 81 dB
Low-cut filter: 40 / 80 Hz, 6 dB/Oct, switchable
Attenuation pad: 10 / 20 dB, switchable
The sE4400 is also available in a matched-pair configuration: sE4400 Matched Pair