Details
INSTANT INSPIRATION
The audio interface companion for artists, producers and podcasters looking to set up a creative recording space.
The USB Pre IV is a high quality 4 input / 4 output 192kHz capable digital interface. The inputs can accommodate any combination of uses including 4 microphone inputs or two high Z instrument and two line inputs.
It’s capable of sample rates from 44.1kHz to 192kHz for computer input. USB audio is converted using high quality bit stereo DAC to analog audio. Custom transformers remove ground loops and other system noise between the digital and analog noise between the digital and analog audio systems
The USB PRE IV is equipped with two pairs of stereo outputs. Connect your studio monitors through the 1⁄4-inch Main Outputs (OUT1/2) on the rear panel using quality cables. Headphones can be used for personal monitoring through the stereo TRS Headphone jack (OUT3/4) on the front panel. Press the Input Monitor button to listen to the signal directly from the inputs.
It provides both MIDI IN and MIDI OUT via rear panel connections. The sample rate is set via the USB interface and its low latency ASIO/WDM driver.
READY TO RECORD
With CUBASE LE Software and USB cable included, the USB Pre IV is fully loaded for recording out of the box. The front panel headphone output and illuminated input gain knobs allow for on the spot monitoring.
SIMPLE. PROFESSIONAL. AFFORDABLE.
Easily connect any mic, line, or instrument into your recording device.
High quality converters and low latency result in professional clarity
and resolution within the scope of any recording project.
- High Quality A/D to D/A convertors
- Sample rates from 44.1k to 192kHz
- Low latency ASIO and WDM driver
- Transformer isolated outputs
- Front panel input monitoring switch
- Low noise discrete mic preamps
- High Z instrument inputs
- Zero latency monitoring
- Front panel headphone output
- MIDI input/output