dMix 128 | NAMM TEC finalist → Here →
ARC Studio+
New

IK Multimedia

ARC Studio+

SKU: IKMT_IP-ARC-STUDIOPLUS-IN

AUD RRP $799.95 Inc GST*

Ask your local dealer for more information

Find a dealer

The Next Evolution in Room Correction

Categories

ARC STUDIO+

HIT-READY MONITORING IN ANY ROOM

The most expensive monitors in the world cannot compensate for challenging room acoustics. ARC STUDIO+ measures your room, your monitors, and your subwoofer, then delivers reference-grade accuracy with any speakers and any sub.

Correction runs outside your DAW, so there’s no plug-in in your session and nothing to remember to switch on. Whether you work in a dedicated studio, a compact writing room, a hybrid setup, or a temporary space, you hear your mix instead of your room.

Standalone calibration, automatic subwoofer alignment, and full-range 20 Hz to 20 kHz correction bring your system into focus fast. Kick and bass lock together, vocal presence is easier to judge, and your decisions translate beyond the room.

Plug it in. Press one button. That’s the entire setup.

Connect the included ARC measurement microphone to the dedicated calibration input and calibrate directly from the hardware. Standalone mode supports fast 1- and 3-point measurement with no computer, DAW, or audio interface required. It reads your speakers, your sub, and your room, then corrects everything in real time.
When you want deeper analysis and customization, connect ARC STUDIO+ to ARC X for higher-resolution 7- and 21-point 3D room measurement, target-curve editing, and advanced profile management. Correction profiles are stored in the hardware, so ARC STUDIO+ keeps working the moment the software is closed.
What you end up with is a monitoring system that’s finally honest. What you hear is what leaves your studio.

Perfect Sub integration

Low-frequency accuracy without the guesswork.
A subwoofer only helps when the whole system moves as one. ARC STUDIO+ automatically detects a connected subwoofer and integrates it with your mains as part of calibration, aligning gain, crossover, phase, and delay with no external processors and no manual measurement work.
The result is a cohesive stereo or 2.1 system with tight, defined low end. The relationship between kick and bass becomes easier to judge, and low-frequency decisions translate more reliably outside the studio.
- Automatic subwoofer detection and routing
- Gain, crossover, phase, and delay aligned automatically
- Works with any brand of monitors and any subwoofer.

Analog, digital, or hybrid

Balanced combo XLR/TRS inputs, balanced XLR monitor outputs, a dedicated subwoofer output, USB-C digital audio, and optical S/PDIF input and output let ARC STUDIO+ fit naturally into modern monitoring systems, in stereo or 2.1.
USB-C playback sends audio directly from your computer to your monitoring chain, while optical digital connectivity lets compatible systems stay in the digital domain from source to speaker. It drops into console-based, hybrid, and fully in-the-box setups without rethinking your routing.

ARC X audio interface showing frequency response graph with blue and orange curves and speaker calibration controls in dark interface

Customise your workflow with ARC X

ARC X is the measurement and control software behind ARC STUDIO+. Connect it when you want higher-resolution 7- and 21-point 3D room analysis, then upload the finished profile and disconnect. Correction keeps running in the hardware.
ARC X is also where you shape how your system sounds. Audition your mix through virtual speakers to check how it holds up on other playback systems, apply or edit target curves for a specific monitoring perspective, and tune your speakers to taste without giving up accuracy.

Nothing else does all of this in one box

Monitor controllers route sound and switch speakers. They don’t fix your room or integrate your sub. Simple room EQ boxes apply generic curves, often only to the mains, with limited bass control and no automatic sub alignment.
Plug-in solutions require a computer in the loop, add latency, and can’t address the analog side of your monitor chain.
ARC STUDIO+ is different:
- Standalone hardware that corrects your entire monitoring system, including the sub
- Powered by ARC X, the latest generation of IK’s ARC technology, first introduced in 2007
- Refined over years of real-world feedback from studios of every size
- Works whether you’re fully in the box, hybrid, or running hardware synths and outboard
- Audio quality and a feature set that nothing else offers at this price.

IN DETAIL:

Audio

  • Supported sample rates 44.1, 48.0, 88.2, 96.0, 178.4, 192.0 kHz

  • Audio conversion resolution 32-bit

  • Frequency Response 2 Hz - 87.0 kHz (- 2.0 dB)

  • Dynamic Range 120 dB (A-weighted)

  • THD (1 kHz@-1dBFS) 0.00011% (-119.4 dB)

  • THD+N (1 kHz@-1dBFS) 0.00023% (-112.7 dB)

  • Channel Crosstalk (1 kHz) -134.0 dB

  • Max Phase Deviation +7° 20Hz, +16° 22kHz

  • Input Impedance (balanced) 20 kOhm

  • Output Impedance (balanced) 50 Ohm

  • Maximum input level +18 dBu

  • Maximum output level +18 dBu

Dimensions

  • Size 19.7cm x 12.2cm x 4.4cm

  • Weight 625g

Learn more directly from IK Multimedia's website →

* All pricing and stock availability are subject to change at any time without notice