Details
The Solo MPA Multi-Voice Tube Preamplifier allows users to blend between a pristine low-noise/low-distortion solid-state transistor circuit and a warmer Class-A tube mic preamp.
The flexible EQ controls allow users to voice the Solo MPA to create their signature sound. Featuring 48V phantom power and a variable input impedance control, users can tailor the Solo MPA to suit their microphone of choice, be it a high-quality dynamic, a studio-grade condenser, or a low-level ribbon
The Solo Series of single-channel rackmount units have been developed for the recording enthusiast with a preference for simplicity.
Key Features
- Adjustable input impedance (600 to 80K ohms)
- Hand selected 12AX7 tube
- Flexible Tilt EQ
- Tunable Lowcut Filter
- Variable Voice Tube/Solid State Control
- Front accessible meter trim
- Discrete class A FET input microphone preamplifier
- Low THD
- Wide frequency response
- Front mounted Instrument/DI Input
- Very high input impedance
- +4dBu/-10dBV output level selection
Specifications
| Frequency Response | 15 Hz to 50 kHz (+0, -1dB) |
| Dynamic range | >110dB (“A” weighted) |
| CMRR | >90dB THD <0.005% (typical |
| Equivalent Input Noise | -129dBu (XLR, “A” weighted) |
| Maximum Input Level | +19dBu (XLR) |
| Maximum Instrument Input | +17dBu |
| Input Impedance | 600-80K ohms adjustable (XLR), >800k ohms (Instrument), +27dBu (XLR) |
| Output Impedance | < 47 ohms (XLR) |
| Maximum Gain | 75dB |
| Meter Calibration | 0VU = +4dBu output (+4dBu mode) 0VU = -10dBV output (-10dBV mode) |
| Low Cut Filter | Single pole,10-200Hz adjustable |
| Tilt EQ
|
+/- 12dB adjustable |
| Power Requirements | 100-120V 60 Hz / 220-240V 50Hz |
| Dimensions: | (HxWxD) 4.45 cm x 48.3 cm x 15.2 cm |
| Weight | 2.5kg |
| Box Dimensions | (HxWxD) 12.6 cm x 51.8cm x 18.9cm |
Note: 0 dBu = 0.775Vrms
