Stylophone CPM DS-2

The CPM DS-2 ANALOG DRONE SYNTHESIZER is a simple, yet powerful universe of modulation possibilities allowing you to create rhythmic movement of filters and blend waveforms for endless soundscapes, pulsating rhythms, and cosmic exploration.

With dynamic waveform blending, multiple oscillators, multimode filters, a simple, yet powerful universe of modulation possibilities and vintage-inspired reverb and modulated delay. Featuring dual 3340 analogue oscillators, vintage reverb algorithms, and Eurorack compatibility, the DS-2 invites you to sculpt unparalleled soundscapes with ease and creativity. Immerse yourself in sonic exploration wherever you go with its compact design, headphone option or built-in speaker, that can be powered by mains, battery or incorporated into your Eurorack case.

With 12 modular patch points, the DS-2 is ready to integrate seamlessly into your existing studio and Eurorack set up. Shape evolving soundscapes, pulsing textures, or cosmic drones with intuitive controls and deep modulation capabilities. In Eurorack format, the DS-2 is 42 HP wide and is powered with its 10-pin power connector, and includes stereo out and twelve 3.5mm patch points for each of the two Drone sections and the Ultra LFO. There’s now a FREE downloadable Patchbook featuring 30 patches that guide you through unlocking the amazing full potential of the DS-2.

"Turn it on and drone away"

Drone Synth Features:

• 2 x 3340 oscillators (based on the original Curtis design) with dynamic waveform blending, PWM and Hard Sync

• 2 sub-oscillators with subsub option and blending mixer

• 2 x 3320 filters (more Curtis design) with HP/LP switch and Drive control

• 14 LFO waveforms

• 7 LFO routing switches

• 5 LFO depth attenuverters

• 12 x 3.5mm patch points (for complex modulation or external connection of oscillators, filters and LFO)

• Stereo/Mono reverb with 8 algorithms (AL3201 based on Alesis reverb chip)

• 1 x PT2399 delay with modulation

• Effects Mixer with Auxiliary input (with Level control)

• Stereo main and headphone outputs

• Built-in 2W speaker

• Powered by AA battery x 6, 12 VDC / 200mA PSU, or 10-pin Eurorack power connector (+12V/ 160 mA, -12V/ 60 mA)

• Eurorack compatibility (42 HP width)

Included:

• 2 x 3.5mm patch cables (grey, 20cm)

• 2 x 3.5mm patch cables (grey, 45cm)

• 1 x 3.5mm 1-into-2 splitter patch cable (white, 15cm)

• 1 x 3.5mm attentuator cable (black, 20cm)

• 1 x 3.5mm stereo patch cable (black, 60cm)

• 1 x Stylophone bridge enclosure locking piece

• 6 x AA batteries

The bridge enclosure locking piece joining two units together