t: +61 (0)3 9555 8081  |  f: +61 (0)3 9555 8083

DiGiGrid IOS for Native

High-Definition I/O with SoundGrid DSP Server

DiGiGrid IOS is a comprehensive audio interface with a built-in SoundGrid DSP server that adds more plugin processing power to your system. Ideal for professional and personal production environments alike, the IOS is the all-in-one solution for Native DAW users (Logic, Cubase, Nuendo, Ableton, Pro Tools Native, etc.)

Together with the SoundGrid Studio System, DiGiGrid IOS enables you to mix and monitor in real time using hundreds of SoundGrid-compatible Waves and third-party plugins, with incredibly low latency of only 0.8 milliseconds.

DiGiGrid IOS features 8 mic/line inputs with broadcast/studio-quality preamps; 8 line outputs; 2 headphone outputs; and MIDI I/O, S/PDIF, and AES ins and outs.

IOS also features a built-in network switch. To connect more SoundGrid-compatible components to your system, all you need is a single Cat 5e/Cat 6 Ethernet cable.

General Specifications


Internal SoundGrid DSP server (SoundGrid Impact Server equivalent)
8 channel mic/line ins (XLR/TRS combo)
8 channel line outs (TRS or 25-pin D-con)
4 SoundGrid RJ45 Ethernet ports
AES/EBU or S/PDIF I/O (switchable)
Optional sample rate conversion on AES / SPDIF inputs
2 headphone outputs with front panel analog level controls
1 AC input
1 USB port (for software upgrades/support only.)
2U rack-mounted
Supported sample rates: 44.1, 48, 88.2, 96 kHz (176.4 and 192 kHz will be supported in the future)
Word clock I/O
Clock synchronization via Word Clock input, AES/EBU, SPDIF, SoundGrid (Sync over Ethernet)), Internal
MIDI I/O
Reset switch

Analog Inputs

Input Impedance: Mic: 2K5 / Line: 8K0 Ohms
Gain Range: Mic: 0 dB to +52.5 dB in 7.5-dB steps / Line: -10 dB to +42.5 dB in 7.5-dB steps
Fine control provides an additional 0dB to 7dB in 0.5-dB steps
Maximum Input Level: Mic: +26 dBu / Line: +36 dBu
Mic Equivalent Input Noise: > -126 dB (150 Ohm source, gain +59.5 dB)
Harmonic Distortion: Typically < 0.01% @ unity gain, -10dB input @ 1 kHz
Frequency Response: +/-0.5 dB (20 Hz to 20 kHz)
Channel Separation: Better than 90 dB (40 Hz to 15 kHz)

Analog Outputs

Maximum Output Level: +22 dBu
Residual Output Noise: <90 dB (20 Hz to 20 kHz)
Frequency Response: +/-0.5 dB (20 Hz to 20 kHz)
Output Impedance: 50 Ohms
Channel Separation: Better than 90 dB (40 Hz to 15 kHz)
Harmonic Distortion: Typically < 0.01% @ unity gain, -10dB input @ 1 kHz

Weight and Dimensions

    Height: 2U / 88.1mm
    Width: 19″ / 482.60 mm
    Depth: 356
    Weight: 6Kg

Comments are closed.